Epilog 75W CO2 Laser Settings for Leather
2 verified settings · manufacturer data · co2 glass laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| cut | — | 8 mm/s | 60% | 1 | — | Result: ? | Contributor: Brant | Handwritten in margins of the manual |
| engrave | — | 1,000 mm/s | 100% | 1 | — | Result: 1mm or less | Contributor: Brant and RickB | Image densities of 4-6 |
About Leather Settings for the Epilog 75W CO2
The Epilog 75W CO2 cuts Leather cleanly at 8 mm/s with 60% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For Leather, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for Leather on the Epilog 75W CO2?↓
For cutting Leather on the Epilog 75W CO2, start at 8 mm/s speed and 60% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for Leather on the Epilog 75W CO2?↓
Air assist is strongly recommended when cutting Leather. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through Leather on the Epilog 75W CO2?↓
The manufacturer recommends 1 pass to cut through Leather at 8 mm/s and 60% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my Epilog 75W CO2 cutting through Leather?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the Epilog 75W CO2
Leather Settings for Other Machines
- Algolaser DIY KIT — leather settings(10)
- Algolaser Delta — leather settings(6)
- Algolaser DIY KIT MINI — leather settings(6)
- Algolaser DIY KIT MK2 — leather settings(6)
- Algolaser Alpha — leather settings(6)
- Boss Laser BL2-T83 — leather settings(6)
- Thunder Laser Nova 80W — leather settings(4)
- Epilog Fusion 40W — leather settings(3)
Save Your Own Epilog 75W CO2 Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your Epilog 75W CO2 Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF