Epilog 75W CO2 Laser Settings for Glass
2 verified settings · manufacturer data · co2 glass laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| cut | — | 600 mm/s | 50% | 1 | — | Result: 500 DPI, light etch | Contributor: Brant | Glass dust/flecks, infill with paint |
| engrave | — | 1,600 mm/s | 90% | 1 | — | Result: 500 DPI, light etch | Contributor: Brant | Glass dust/flecks, infill with paint |
About Glass Settings for the Epilog 75W CO2
The Epilog 75W CO2 cuts Glass cleanly at 600 mm/s with 50% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For Glass, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for Glass on the Epilog 75W CO2?↓
For cutting Glass on the Epilog 75W CO2, start at 600 mm/s speed and 50% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for Glass on the Epilog 75W CO2?↓
Air assist is strongly recommended when cutting Glass. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through Glass on the Epilog 75W CO2?↓
The manufacturer recommends 1 pass to cut through Glass at 600 mm/s and 50% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my Epilog 75W CO2 cutting through Glass?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the Epilog 75W CO2
Glass Settings for Other Machines
- Boss Laser BL2-T83 — glass settings(3)
- Laserscript Laserscript LS6090 — glass settings(3)
- WeCreat Lumos Ultra UV 6W — glass settings(2)
- P20 PLUS — glass settings(2)
- WeCreat Lumos Ultra UV 5W — glass settings(2)
- OMTech OMTech CO2 — glass settings(2)
- Thunder Laser Nova 80W — glass settings(2)
- K40 K40 — glass settings(2)
Save Your Own Epilog 75W CO2 Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your Epilog 75W CO2 Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF