Epilog 75W CO2 Laser Settings for Cardboard
3 verified settings · manufacturer data · co2 glass laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| cut | — | 100 mm/s | 40% | 2 | — | Result: Cut thru | Contributor: Brant | 2 passes reduces risk of flame |
| engrave | — | 2,000 mm/s | 20% | 1 | — | Result: <1mm | Contributor: Brant |
| score | Line | 2,000 mm/s | 20% | 1 | — | Result: <1mm | Contributor: Brant |
About Cardboard Settings for the Epilog 75W CO2
The Epilog 75W CO2 cuts Cardboard cleanly at 100 mm/s with 40% power over 2 passes. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For Cardboard, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for Cardboard on the Epilog 75W CO2?↓
For cutting Cardboard on the Epilog 75W CO2, start at 100 mm/s speed and 40% power with 2 passes. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for Cardboard on the Epilog 75W CO2?↓
Air assist is strongly recommended when cutting Cardboard. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through Cardboard on the Epilog 75W CO2?↓
The manufacturer recommends 2 passes to cut through Cardboard at 100 mm/s and 40% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my Epilog 75W CO2 cutting through Cardboard?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the Epilog 75W CO2
Cardboard Settings for Other Machines
- Boss Laser BL2-T83 — cardboard settings(6)
- Thunder Laser Nova/Bolt Series (100W CO2) — cardboard settings(3)
- Thunder Laser Nova/Bolt Series (130W CO2) — cardboard settings(3)
- Thunder Laser Nova/Bolt Series (80W CO2) — cardboard settings(3)
- Thunder Laser Nova/Bolt Series (60W CO2) — cardboard settings(3)
- Thunder Laser Nova 80W — cardboard settings(3)
- Thunder Laser Nova Series (55W RF) — cardboard settings(3)
- Thunder Laser Nova Series (30W RF) — cardboard settings(3)
Save Your Own Epilog 75W CO2 Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your Epilog 75W CO2 Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF