Epilog 75W CO2 Laser Settings for Clear Acrylic
3 verified settings · manufacturer data · co2 glass laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| cut | — | 38 mm/s | 100% | 1 | — | Result: cut thru no burning | Contributor: Markus | 60W Dec 2019 with new lens and air assist |
| score | Line | 150 mm/s | 2% | 1 | — | Result: 0.05” | Contributor: Alden | n/a |
About Clear Acrylic Settings for the Epilog 75W CO2
The Epilog 75W CO2 cuts Clear Acrylic cleanly at 38 mm/s with 100% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For Clear Acrylic, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for Clear Acrylic on the Epilog 75W CO2?↓
For cutting Clear Acrylic on the Epilog 75W CO2, start at 38 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for Clear Acrylic on the Epilog 75W CO2?↓
Air assist is strongly recommended when cutting Clear Acrylic. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through Clear Acrylic on the Epilog 75W CO2?↓
The manufacturer recommends 1 pass to cut through Clear Acrylic at 38 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my Epilog 75W CO2 cutting through Clear Acrylic?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the Epilog 75W CO2
Clear Acrylic Settings for Other Machines
Save Your Own Epilog 75W CO2 Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your Epilog 75W CO2 Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF