Skip to main content

Epilog 75W CO2 Laser Settings for Rubber

4 verified settings · manufacturer data · co2 glass laser · Updated July 2026

Quick Answer — Best Cut Setting75W
1,000 mm/s
Speed
100%
Power
1
Passes
OperationModeSpeedPower (%)PassesAir AssistNotes
cut—1,000 mm/s100%1—Result: Shallow cut | Contributor: ShaneT | High flame
engrave—1,000 mm/s100%1—Result: Shallow cut | Contributor: ShaneT | Some flame

About Rubber Settings for the Epilog 75W CO2

The Epilog 75W CO2 cuts Rubber cleanly at 1000 mm/s with 100% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Rubber, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Rubber on the Epilog 75W CO2?↓

For cutting Rubber on the Epilog 75W CO2, start at 1000 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Rubber on the Epilog 75W CO2?↓

Air assist is strongly recommended when cutting Rubber. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Rubber on the Epilog 75W CO2?↓

The manufacturer recommends 1 pass to cut through Rubber at 1000 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my Epilog 75W CO2 cutting through Rubber?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Save Your Own Epilog 75W CO2 Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your Epilog 75W CO2 Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandEpilog
Model75W CO2
Laser Typeco2 glass
Wattage75W
Records4
Browse all Epilog 75W CO2 materials →

Other Epilog 75W CO2 Materials