Algolaser Delta Laser Settings for Leather
6 verified settings · manufacturer data · diode laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| cut | — | 28 mm/s | 100% | 1 | — | — |
| engrave | — | 500 mm/s | 100% | 1 | — | — |
About Leather Settings for the Algolaser Delta
The Algolaser Delta cuts Leather cleanly at 28.33 mm/s with 100% power. Because the Algolaser Delta is available in multiple wattage variants (40W, 22W), settings are grouped by wattage above — select your laser's wattage to see the right numbers. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For Leather, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for Leather on the Algolaser Delta?↓
For cutting Leather on the Algolaser Delta, start at 28.33 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for Leather on the Algolaser Delta?↓
Air assist is strongly recommended when cutting Leather. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through Leather on the Algolaser Delta?↓
The manufacturer recommends 1 pass to cut through Leather at 28.33 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my Algolaser Delta cutting through Leather?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the Algolaser Delta
Leather Settings for Other Machines
- Algolaser DIY KIT — leather settings(10)
- Algolaser DIY KIT MINI — leather settings(6)
- Algolaser DIY KIT MK2 — leather settings(6)
- Algolaser Alpha — leather settings(6)
- Boss Laser BL2-T83 — leather settings(6)
- Thunder Laser Nova 80W — leather settings(4)
- Epilog Fusion 40W — leather settings(3)
- Epilog Fusion 30W — leather settings(3)
Save Your Own Algolaser Delta Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your Algolaser Delta Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF