Sculpfun iCube Ultra IR 1.2W Laser Settings for Brass
1 verified settings · manufacturer data · diode laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| mark | — | 3 mm/s | 90% | 1 | — | Infrared laser for brass marking. |
About Brass Settings for the Sculpfun iCube Ultra IR 1.2W
The Sculpfun iCube Ultra IR 1.2W cuts Brass cleanly at 2.5 mm/s with 90% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For Brass, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for Brass on the Sculpfun iCube Ultra IR 1.2W?↓
For cutting Brass on the Sculpfun iCube Ultra IR 1.2W, start at 2.5 mm/s speed and 90% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for Brass on the Sculpfun iCube Ultra IR 1.2W?↓
Air assist is strongly recommended when cutting Brass. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through Brass on the Sculpfun iCube Ultra IR 1.2W?↓
The manufacturer recommends 1 pass to cut through Brass at 2.5 mm/s and 90% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my Sculpfun iCube Ultra IR 1.2W cutting through Brass?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the Sculpfun iCube Ultra IR 1.2W
Brass Settings for Other Machines
- MOPA 150mm lens — brass settings(15)
- WeCreat Lumos Ultra MOPA 100W — brass settings(7)
- Raycus 70mm lens — brass settings(6)
- xTool D1 — brass settings(6)
- Raycus 30W — brass settings(5)
- WeCreat Lumos Ultra MOPA 60W — brass settings(4)
- xTool F1 Ultra — brass settings(4)
- WeCreat Lumos Ultra UV 6W — brass settings(3)
Save Your Own Sculpfun iCube Ultra IR 1.2W Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your Sculpfun iCube Ultra IR 1.2W Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF