Skip to main content

Sculpfun iCube Ultra IR 1.2W Laser Settings for Aluminum

1 verified settings · manufacturer data · diode laser · Updated July 2026

Quick Answer — Best Mark Setting1W
3 mm/s
Speed
85%
Power
1
Passes
OperationModeSpeedPower (%)PassesAir AssistNotes
mark—3 mm/s85%1—Infrared laser for aluminum marking.

About Aluminum Settings for the Sculpfun iCube Ultra IR 1.2W

The Sculpfun iCube Ultra IR 1.2W cuts Aluminum cleanly at 3.33 mm/s with 85% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Aluminum, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Aluminum on the Sculpfun iCube Ultra IR 1.2W?↓

For cutting Aluminum on the Sculpfun iCube Ultra IR 1.2W, start at 3.33 mm/s speed and 85% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Aluminum on the Sculpfun iCube Ultra IR 1.2W?↓

Air assist is strongly recommended when cutting Aluminum. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Aluminum on the Sculpfun iCube Ultra IR 1.2W?↓

The manufacturer recommends 1 pass to cut through Aluminum at 3.33 mm/s and 85% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my Sculpfun iCube Ultra IR 1.2W cutting through Aluminum?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Save Your Own Sculpfun iCube Ultra IR 1.2W Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your Sculpfun iCube Ultra IR 1.2W Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandSculpfun
ModeliCube Ultra IR 1.2W
Laser Typediode
Wattage1W
Records1
Browse all Sculpfun iCube Ultra IR 1.2W materials →

Other Sculpfun iCube Ultra IR 1.2W Materials

View all →