Skip to main content

110mm lens Laser Settings for Aluminum

2 verified settings · manufacturer data · fiber laser · Updated July 2026

Quick Answer — Best Mark Setting50W
200 mm/s
Speed
40%
Power
1
Passes
Source: OMG Laser
OperationModeSpeedPower (%)PassesAir AssistNotes
mark—200 mm/s40%1—Black engraving starting point.

About Aluminum Settings for the 110mm lens

The 110mm lens cuts Aluminum cleanly at 200 mm/s with 40% power. Because the 110mm lens is available in multiple wattage variants (50W, 30W), settings are grouped by wattage above — select your laser's wattage to see the right numbers. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Aluminum, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Aluminum on the 110mm lens?↓

For cutting Aluminum on the 110mm lens, start at 200 mm/s speed and 40% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Aluminum on the 110mm lens?↓

Air assist is strongly recommended when cutting Aluminum. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Aluminum on the 110mm lens?↓

The manufacturer recommends 1 pass to cut through Aluminum at 200 mm/s and 40% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my 110mm lens cutting through Aluminum?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

More Settings for the 110mm lens

Save Your Own 110mm lens Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your 110mm lens Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandUnknown
Model110mm lens
Laser Typefiber
Variants50W, 30W
Records2
Browse all 110mm lens materials →

Other 110mm lens Materials