110mm lens Laser Settings for Stainless Steel
1 verified settings · manufacturer data · fiber laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| mark | — | 200 mm/s | 70% | 1 | — | Black annealing; 5mm defocus (out of focus). |
About Stainless Steel Settings for the 110mm lens
The 110mm lens cuts Stainless Steel cleanly at 200 mm/s with 70% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For Stainless Steel, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for Stainless Steel on the 110mm lens?↓
For cutting Stainless Steel on the 110mm lens, start at 200 mm/s speed and 70% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for Stainless Steel on the 110mm lens?↓
Air assist is strongly recommended when cutting Stainless Steel. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through Stainless Steel on the 110mm lens?↓
The manufacturer recommends 1 pass to cut through Stainless Steel at 200 mm/s and 70% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my 110mm lens cutting through Stainless Steel?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the 110mm lens
Stainless Steel Settings for Other Machines
- Algolaser Delta — stainless steel settings(15)
- WeCreat Lumos Ultra MOPA 100W — stainless steel settings(8)
- WeCreat Lumos Ultra MOPA 60W — stainless steel settings(8)
- Raycus 30W — stainless steel settings(8)
- ComMarker ComMarker B4 20W — stainless steel settings(6)
- MOPA 150x150mm lens — stainless steel settings(6)
- ComMarker ComMarker B6 60W MOPA, 150mm field lens — stainless steel settings(6)
- ComMarker ComMarker B6 60W MOPA — stainless steel settings(6)
Save Your Own 110mm lens Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your 110mm lens Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF