Skip to main content

ComMarker ComMarker B6 60W MOPA Laser Settings for Stainless Steel

6 verified settings · manufacturer data · fiber mopa laser · Updated July 2026

Quick Answer — Best Mark Setting60W
750 mm/s
Speed
30%
Power
1
Passes
OperationModeSpeedPower (%)PassesAir AssistNotes
mark—750 mm/s30%1—From color test grid table, row labeled 'White'.

About Stainless Steel Settings for the ComMarker ComMarker B6 60W MOPA

The ComMarker ComMarker B6 60W MOPA cuts Stainless Steel cleanly at 750 mm/s with 30% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Stainless Steel, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Stainless Steel on the ComMarker ComMarker B6 60W MOPA?↓

For cutting Stainless Steel on the ComMarker ComMarker B6 60W MOPA, start at 750 mm/s speed and 30% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Stainless Steel on the ComMarker ComMarker B6 60W MOPA?↓

Air assist is strongly recommended when cutting Stainless Steel. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Stainless Steel on the ComMarker ComMarker B6 60W MOPA?↓

The manufacturer recommends 1 pass to cut through Stainless Steel at 750 mm/s and 30% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my ComMarker ComMarker B6 60W MOPA cutting through Stainless Steel?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Save Your Own ComMarker ComMarker B6 60W MOPA Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your ComMarker ComMarker B6 60W MOPA Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandComMarker
ModelComMarker B6 60W MOPA
Laser Typefiber mopa
Wattage60W
Records6
Browse all ComMarker ComMarker B6 60W MOPA materials →