xTool D1 Laser Settings for 5mm Black Opaque Glossy Acrylic
5 verified settings · manufacturer data · diode laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| score | Line | 60 mm/s | 40% | 1 | — | — |
| fill | Fill | 180 mm/s | 40% | 1 | — | — |
| engrave | — | 100 mm/s | 30% | 1 | — | — |
| cut | — | 3 mm/s | 100% | 1 | — | — |
About 5mm Black Opaque Glossy Acrylic Settings for the xTool D1
The xTool D1 cuts 5mm Black Opaque Glossy Acrylic cleanly at 3 mm/s with 100% power. Because the D1 is available in multiple wattage variants (20W, 10W), settings are grouped by wattage above — select your laser's wattage to see the right numbers. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For 5mm Black Opaque Glossy Acrylic, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for 5mm Black Opaque Glossy Acrylic on the xTool D1?↓
For cutting 5mm Black Opaque Glossy Acrylic on the xTool D1, start at 3 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for 5mm Black Opaque Glossy Acrylic on the xTool D1?↓
Air assist is strongly recommended when cutting 5mm Black Opaque Glossy Acrylic. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through 5mm Black Opaque Glossy Acrylic on the xTool D1?↓
The manufacturer recommends 1 pass to cut through 5mm Black Opaque Glossy Acrylic at 3 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my xTool D1 cutting through 5mm Black Opaque Glossy Acrylic?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the xTool D1
5mm Black Opaque Glossy Acrylic Settings for Other Machines
- xTool D1 Pro 2.0 — 5mm black opaque glossy acrylic settings(7)
- xTool D1 Pro — 5mm black opaque glossy acrylic settings(7)
- xTool P2 — 5mm black opaque glossy acrylic settings(4)
- xTool S1 — 5mm black opaque glossy acrylic settings(3)
- xTool M1 — 5mm black opaque glossy acrylic settings(1)
- xTool F1 — 5mm black opaque glossy acrylic settings(1)
Save Your Own xTool D1 Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your xTool D1 Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF