xTool D1 Laser Settings for 1/25"(1mm) Black Acrylic
13 verified settings · manufacturer data · diode laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| score | Line | 50 mm/s | 50% | 1 | — | — |
| fill | Fill | 180 mm/s | 43% | 1 | — | — |
| engrave | — | 180 mm/s | 30% | 1 | — | — |
| cut | — | 10 mm/s | 100% | 1 | — | — |
About 1/25"(1mm) Black Acrylic Settings for the xTool D1
The xTool D1 cuts 1/25"(1mm) Black Acrylic cleanly at 10 mm/s with 100% power. Because the D1 is available in multiple wattage variants (20W, 10W, 5W), settings are grouped by wattage above — select your laser's wattage to see the right numbers. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For 1/25"(1mm) Black Acrylic, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for 1/25"(1mm) Black Acrylic on the xTool D1?↓
For cutting 1/25"(1mm) Black Acrylic on the xTool D1, start at 10 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for 1/25"(1mm) Black Acrylic on the xTool D1?↓
Air assist is strongly recommended when cutting 1/25"(1mm) Black Acrylic. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through 1/25"(1mm) Black Acrylic on the xTool D1?↓
The manufacturer recommends 1 pass to cut through 1/25"(1mm) Black Acrylic at 10 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my xTool D1 cutting through 1/25"(1mm) Black Acrylic?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the xTool D1
1/25"(1mm) Black Acrylic Settings for Other Machines
- xTool D1 Pro 2.0 — 1/25"(1mm) black acrylic settings(17)
- xTool D1 Pro — 1/25"(1mm) black acrylic settings(17)
- xTool S1 — 1/25"(1mm) black acrylic settings(14)
- xTool M1 — 1/25"(1mm) black acrylic settings(8)
- xTool M1 Ultra — 1/25"(1mm) black acrylic settings(8)
- xTool P2S — 1/25"(1mm) black acrylic settings(6)
- xTool F1 — 1/25"(1mm) black acrylic settings(5)
- xTool P3 — 1/25"(1mm) black acrylic settings(4)
Save Your Own xTool D1 Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your xTool D1 Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF