Skip to main content

xTool D1 Laser Settings for Black to Silver Laserable PU Leather

12 verified settings · manufacturer data · diode laser · Updated July 2026

Quick Answer — Best Score Setting20W
Line
Mode
65 mm/s
Speed
30%
Power
1
Passes
Source: xTool Material Library
OperationModeSpeedPower (%)PassesAir AssistNotes
scoreLine65 mm/s30%1——
fillFill180 mm/s30%1——
engrave—80 mm/s20%1——

About Black to Silver Laserable PU Leather Settings for the xTool D1

The xTool D1 cuts Black to Silver Laserable PU Leather cleanly at 65 mm/s with 30% power. Because the D1 is available in multiple wattage variants (20W, 10W, 5W, 2W), settings are grouped by wattage above — select your laser's wattage to see the right numbers. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Black to Silver Laserable PU Leather, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Black to Silver Laserable PU Leather on the xTool D1?↓

For cutting Black to Silver Laserable PU Leather on the xTool D1, start at 65 mm/s speed and 30% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Black to Silver Laserable PU Leather on the xTool D1?↓

Air assist is strongly recommended when cutting Black to Silver Laserable PU Leather. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Black to Silver Laserable PU Leather on the xTool D1?↓

The manufacturer recommends 1 pass to cut through Black to Silver Laserable PU Leather at 65 mm/s and 30% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my xTool D1 cutting through Black to Silver Laserable PU Leather?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Save Your Own xTool D1 Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your xTool D1 Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandxTool
ModelD1
Laser Typediode
Variants20W, 10W, 5W, 2W
Records12
Browse all xTool D1 materials →