Skip to main content

200x200mm lens Laser Settings for Aluminum

1 verified settings · manufacturer data · fiber laser · Updated July 2026

Quick Answer — Best Engrave Setting50W
Bitmap
Mode
2,500 mm/s
Speed
25%
Power
1
Passes
Source: OMG Laser
OperationModeSpeedPower (%)PassesAir AssistNotes
engraveBitmap2,500 mm/s25%1—Photo engraving on aluminum card. Gray/fixed DPI/invert.

About Aluminum Settings for the 200x200mm lens

The 200x200mm lens cuts Aluminum cleanly at 2500 mm/s with 25% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Aluminum, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Aluminum on the 200x200mm lens?↓

For cutting Aluminum on the 200x200mm lens, start at 2500 mm/s speed and 25% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Aluminum on the 200x200mm lens?↓

Air assist is strongly recommended when cutting Aluminum. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Aluminum on the 200x200mm lens?↓

The manufacturer recommends 1 pass to cut through Aluminum at 2500 mm/s and 25% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my 200x200mm lens cutting through Aluminum?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

More Settings for the 200x200mm lens

Save Your Own 200x200mm lens Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your 200x200mm lens Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandUnknown
Model200x200mm lens
Laser Typefiber
Wattage50W
Records1
Browse all 200x200mm lens materials →

Other 200x200mm lens Materials