xTool S1 Laser Settings for Stainless Steel Necklace
12 verified settings · manufacturer data · diode laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| score | Line | 6 mm/s | 28% | 1 | — | — |
| fill | Fill | 300 mm/s | 38% | 1 | — | — |
| engrave | — | 220 mm/s | 80% | 1 | — | — |
About Stainless Steel Necklace Settings for the xTool S1
The xTool S1 cuts Stainless Steel Necklace cleanly at 6 mm/s with 28% power. Because the S1 is available in multiple wattage variants (40W, 20W, 10W, 2W), settings are grouped by wattage above — select your laser's wattage to see the right numbers. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For Stainless Steel Necklace, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for Stainless Steel Necklace on the xTool S1?↓
For cutting Stainless Steel Necklace on the xTool S1, start at 6 mm/s speed and 28% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for Stainless Steel Necklace on the xTool S1?↓
Air assist is strongly recommended when cutting Stainless Steel Necklace. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through Stainless Steel Necklace on the xTool S1?↓
The manufacturer recommends 1 pass to cut through Stainless Steel Necklace at 6 mm/s and 28% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my xTool S1 cutting through Stainless Steel Necklace?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the xTool S1
Stainless Steel Necklace Settings for Other Machines
- xTool D1 Pro 2.0 — stainless steel necklace settings(6)
- xTool D1 Pro — stainless steel necklace settings(6)
- xTool F1 — stainless steel necklace settings(5)
- xTool M1 — stainless steel necklace settings(5)
- xTool F1 Ultra — stainless steel necklace settings(4)
- xTool F1 Lite — stainless steel necklace settings(3)
- xTool F2 Ultra — stainless steel necklace settings(2)
- xTool F2 Ultra (Single) — stainless steel necklace settings(2)
Save Your Own xTool S1 Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your xTool S1 Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF