Skip to main content

xTool F1 Lite Laser Settings for Stainless Steel Necklace

3 verified settings · manufacturer data · diode laser · Updated July 2026

Quick Answer — Best Fill Setting10W
Fill
Mode
20 mm/s
Speed
80%
Power
1
Passes
Source: xTool Material Library
OperationModeSpeedPower (%)PassesAir AssistNotes
fillFill20 mm/s80%1——
scoreLine15 mm/s85%1——

About Stainless Steel Necklace Settings for the xTool F1 Lite

The xTool F1 Lite cuts Stainless Steel Necklace cleanly at 20 mm/s with 80% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Stainless Steel Necklace, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Stainless Steel Necklace on the xTool F1 Lite?↓

For cutting Stainless Steel Necklace on the xTool F1 Lite, start at 20 mm/s speed and 80% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Stainless Steel Necklace on the xTool F1 Lite?↓

Air assist is strongly recommended when cutting Stainless Steel Necklace. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Stainless Steel Necklace on the xTool F1 Lite?↓

The manufacturer recommends 1 pass to cut through Stainless Steel Necklace at 20 mm/s and 80% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my xTool F1 Lite cutting through Stainless Steel Necklace?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Save Your Own xTool F1 Lite Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your xTool F1 Lite Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandxTool
ModelF1 Lite
Laser Typediode
Wattage10W
Records3
Browse all xTool F1 Lite materials →