xTool P2 Black to Silver Laserable PU Leather Laser Settings

xTool P2 Laser Settings for Black to Silver Laserable PU Leather

2 verified settings · manufacturer data · co2 glass laser · Updated July 2026

Quick Answer — Best Fill Setting55W

Fill

Mode

300 mm/s

Speed

12%

Power

Passes

Source: xTool Material Library

Operation	Mode	Speed	Power (%)	Passes	Air Assist	Notes
fill	Fill	300 mm/s	12%	1	—	—
engrave	—	300 mm/s	10%	1	—	—

About Black to Silver Laserable PU Leather Settings for the xTool P2

The xTool P2 cuts Black to Silver Laserable PU Leather cleanly at 300 mm/s with 12% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Black to Silver Laserable PU Leather, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Black to Silver Laserable PU Leather on the xTool P2?↓

For cutting Black to Silver Laserable PU Leather on the xTool P2, start at 300 mm/s speed and 12% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Black to Silver Laserable PU Leather on the xTool P2?↓

Air assist is strongly recommended when cutting Black to Silver Laserable PU Leather. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Black to Silver Laserable PU Leather on the xTool P2?↓

The manufacturer recommends 1 pass to cut through Black to Silver Laserable PU Leather at 300 mm/s and 12% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my xTool P2 cutting through Black to Silver Laserable PU Leather?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.