WeCreat Lumos Ultra UV 6W Laser Settings for Leaf - Maple Leaf
4 verified settings · manufacturer data · uv laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| engrave | Bitmap | 3000 µs/dot | 10% | 1 | — | Imported from WeCreat Lumos Ultra template id 5c01e0c9-cfe4-49ba-b600-9ce94dcfef2c. WeCreat source operation: bitmapEngrave. WeCreat power key: YN_6W. WeCreat material type code: 4. WeCreat lineDesity: 300. WeCreat dotDuration: 3000. WeCreat bitmap dither mode: jarvis. Material slug hint: leaf. |
| cut | — | 50 mm/s | 100% | 1 | — | Imported from WeCreat Lumos Ultra template id 5c01e0c9-cfe4-49ba-b600-9ce94dcfef2c. WeCreat source operation: cut. WeCreat power key: YN_6W. WeCreat material type code: 4. WeCreat cutMode: default. Break points: {"breakPointNum":2,"breakPointSize":0.4,"isBreakPoint":false,"isAutoBreakPoint":true}. Material slug hint: leaf. |
| score | Line | 2,000 mm/s | 60% | 1 | — | Imported from WeCreat Lumos Ultra template id 5c01e0c9-cfe4-49ba-b600-9ce94dcfef2c. WeCreat source operation: engrave. WeCreat power key: YN_6W. WeCreat material type code: 4. Material slug hint: leaf. |
About Leaf - Maple Leaf Settings for the WeCreat Lumos Ultra UV 6W
The WeCreat Lumos Ultra UV 6W cuts Leaf - Maple Leaf cleanly at 50 mm/s with 100% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For Leaf - Maple Leaf, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for Leaf - Maple Leaf on the WeCreat Lumos Ultra UV 6W?↓
For cutting Leaf - Maple Leaf on the WeCreat Lumos Ultra UV 6W, start at 50 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for Leaf - Maple Leaf on the WeCreat Lumos Ultra UV 6W?↓
Air assist is strongly recommended when cutting Leaf - Maple Leaf. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through Leaf - Maple Leaf on the WeCreat Lumos Ultra UV 6W?↓
The manufacturer recommends 1 pass to cut through Leaf - Maple Leaf at 50 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my WeCreat Lumos Ultra UV 6W cutting through Leaf - Maple Leaf?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the WeCreat Lumos Ultra UV 6W
Leaf - Maple Leaf Settings for Other Machines
Save Your Own WeCreat Lumos Ultra UV 6W Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your WeCreat Lumos Ultra UV 6W Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF