WeCreat Lumos Ultra UV 6W Wood - Birch Plywood Laser Settings

WeCreat Lumos Ultra UV 6W Laser Settings for Wood - Birch Plywood

8 verified settings · manufacturer data · uv laser · Updated July 2026

Quick Answer — Best Cut Setting6W

Speed (mm/s)

100%

Power

Passes

Source: WeCreat Lumos Ultra Template Library

Operation	Mode	Speed (mm/s)	Power (%)	Passes	Air Assist	Notes
engrave	Bitmap	2	40%	1	—	Imported from WeCreat Lumos Ultra template id 76c1892b-2934-4137-9689-f8f50a3c196d. WeCreat source operation: bitmapEngrave. WeCreat power key: YN_6W. WeCreat material type code: 1. WeCreat lineDesity: 300. WeCreat dotDuration: 3000. WeCreat bitmap dither mode: jarvis. Material slug hint: birch-plywood.
cut	—	10	100%	10	—	Imported from WeCreat Lumos Ultra template id 76c1892b-2934-4137-9689-f8f50a3c196d. WeCreat source operation: cut. WeCreat power key: YN_6W. WeCreat material type code: 1. WeCreat cutMode: default. Break points: {"breakPointNum":2,"breakPointSize":0.4,"isBreakPoint":false,"isAutoBreakPoint":true}. Material slug hint: hardwood.
score	Line	100	100%	1	—	Imported from WeCreat Lumos Ultra template id 76c1892b-2934-4137-9689-f8f50a3c196d. WeCreat source operation: engrave. WeCreat power key: YN_6W. WeCreat material type code: 1. Material slug hint: hardwood.

About Wood - Birch Plywood Settings for the WeCreat Lumos Ultra UV 6W

The WeCreat Lumos Ultra UV 6W cuts Wood - Birch Plywood cleanly at 10 mm/s with 100% power over 10 passes. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Wood - Birch Plywood, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Wood - Birch Plywood on the WeCreat Lumos Ultra UV 6W?↓

For cutting Wood - Birch Plywood on the WeCreat Lumos Ultra UV 6W, start at 10 mm/s speed and 100% power with 10 passes. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Wood - Birch Plywood on the WeCreat Lumos Ultra UV 6W?↓

Air assist is strongly recommended when cutting Wood - Birch Plywood. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Wood - Birch Plywood on the WeCreat Lumos Ultra UV 6W?↓

The manufacturer recommends 10 passes to cut through Wood - Birch Plywood at 10 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my WeCreat Lumos Ultra UV 6W cutting through Wood - Birch Plywood?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.