Skip to main content

WeCreat Lumos Ultra UV 6W Laser Settings for Blue thermos

2 verified settings · manufacturer data · uv laser · Updated July 2026

Quick Answer — Best Score Setting6W
Line
Mode
300 mm/s
Speed
100%
Power
1
Passes
OperationModeSpeedPower (%)PassesAir AssistNotes
scoreLine300 mm/s100%1—Imported from WeCreat Lumos Ultra template id 3eef40b5-2c22-4e04-98b1-04c28ceb2653. WeCreat source operation: engrave. WeCreat power key: YN_6W. WeCreat material type code: 8. Material slug hint: stainless-steel.
engraveFill300 mm/s100%1—Imported from WeCreat Lumos Ultra template id 3eef40b5-2c22-4e04-98b1-04c28ceb2653. WeCreat source operation: fillEngrave. WeCreat power key: YN_6W. WeCreat material type code: 8. WeCreat lineDesity: 300. Material slug hint: stainless-steel.

About Blue thermos Settings for the WeCreat Lumos Ultra UV 6W

The WeCreat Lumos Ultra UV 6W cuts Blue thermos cleanly at 300 mm/s with 100% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Blue thermos, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Blue thermos on the WeCreat Lumos Ultra UV 6W?↓

For cutting Blue thermos on the WeCreat Lumos Ultra UV 6W, start at 300 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Blue thermos on the WeCreat Lumos Ultra UV 6W?↓

Air assist is strongly recommended when cutting Blue thermos. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Blue thermos on the WeCreat Lumos Ultra UV 6W?↓

The manufacturer recommends 1 pass to cut through Blue thermos at 300 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my WeCreat Lumos Ultra UV 6W cutting through Blue thermos?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Blue thermos Settings for Other Machines

Save Your Own WeCreat Lumos Ultra UV 6W Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your WeCreat Lumos Ultra UV 6W Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandWeCreat
ModelLumos Ultra UV 6W
Laser Typeuv
Wattage6W
Records2
Browse all WeCreat Lumos Ultra UV 6W materials →