Skip to main content

xTool F2 Ultra Laser Settings for Brass

3 verified settings · manufacturer data · fiber mopa laser · Updated July 2026

Quick Answer — Best Engrave Setting60W
2,000 mm/s
Speed
100%
Power
1
Passes
Source: xTool Material Library
OperationModeSpeedPower (%)PassesAir AssistNotes
engrave—2,000 mm/s100%1——
scoreLine2,400 mm/s90%1——
fillFill1,500 mm/s64%1——

About Brass Settings for the xTool F2 Ultra

The xTool F2 Ultra cuts Brass cleanly at 2000 mm/s with 100% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Brass, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Brass on the xTool F2 Ultra?↓

For cutting Brass on the xTool F2 Ultra, start at 2000 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Brass on the xTool F2 Ultra?↓

Air assist is strongly recommended when cutting Brass. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Brass on the xTool F2 Ultra?↓

The manufacturer recommends 1 pass to cut through Brass at 2000 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my xTool F2 Ultra cutting through Brass?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Save Your Own xTool F2 Ultra Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your xTool F2 Ultra Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandxTool
ModelF2 Ultra
Laser Typefiber mopa
Wattage60W
Records3
Browse all xTool F2 Ultra materials →