xTool D1 Pro 20W Round Wooden Keychain Laser Settings

xTool D1 Pro 20W Laser Settings for Round Wooden Keychain

2 verified settings · manufacturer data · diode laser · Updated January 2026

Quick Answer — Best Engrave Setting20W

Speed (mm/s)

20%

Power

Passes

Air assist: NoSource: xTool LightBurn Library (20W)

Operation	Speed (mm/s)	Power (%)	Passes	Air Assist	Notes
engrave	85	20%	1	—	LightBurn Library: Cut
score	60	80%	1	—	LightBurn Library: Cut

About Round Wooden Keychain Settings for the xTool D1 Pro 20W

The xTool D1 Pro 20W cuts Round Wooden Keychain cleanly at 85 mm/s with 20% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Round Wooden Keychain, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Round Wooden Keychain on the xTool D1 Pro 20W?↓

For cutting Round Wooden Keychain on the xTool D1 Pro 20W, start at 85 mm/s speed and 20% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Round Wooden Keychain on the xTool D1 Pro 20W?↓

Air assist is not required for Round Wooden Keychain on the xTool D1 Pro 20W according to manufacturer data, though it can still help reduce smoke and improve cut quality on organic materials.

How many passes to cut through Round Wooden Keychain on the xTool D1 Pro 20W?↓

The manufacturer recommends 1 pass to cut through Round Wooden Keychain at 85 mm/s and 20% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my xTool D1 Pro 20W cutting through Round Wooden Keychain?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.