ComMarker ComMarker B6 30W Laser Settings for Tumbler (Stainless Steel)
3 verified settings · manufacturer data · fiber laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| mark | — | 3,500 mm/s | 40% | 1 | — | Cleanup pass after the two marking passes above. |
About Tumbler (Stainless Steel) Settings for the ComMarker ComMarker B6 30W
The ComMarker ComMarker B6 30W cuts Tumbler (Stainless Steel) cleanly at 3500 mm/s with 40% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For Tumbler (Stainless Steel), the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for Tumbler (Stainless Steel) on the ComMarker ComMarker B6 30W?↓
For cutting Tumbler (Stainless Steel) on the ComMarker ComMarker B6 30W, start at 3500 mm/s speed and 40% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for Tumbler (Stainless Steel) on the ComMarker ComMarker B6 30W?↓
Air assist is strongly recommended when cutting Tumbler (Stainless Steel). It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through Tumbler (Stainless Steel) on the ComMarker ComMarker B6 30W?↓
The manufacturer recommends 1 pass to cut through Tumbler (Stainless Steel) at 3500 mm/s and 40% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my ComMarker ComMarker B6 30W cutting through Tumbler (Stainless Steel)?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the ComMarker ComMarker B6 30W
Tumbler (Stainless Steel) Settings for Other Machines
Save Your Own ComMarker ComMarker B6 30W Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your ComMarker ComMarker B6 30W Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF
