Skip to main content

ComMarker ComMarker B6 30W Laser Settings for Brass Stamp

1 verified settings · manufacturer data · fiber laser · Updated July 2026

Quick Answer — Best Engrave Setting30W
1,000 mm/s
Speed
10%
Power
10
Passes
OperationModeSpeedPower (%)PassesAir AssistNotes
engrave—1,000 mm/s10%10—Fine detail engraving; ~1.5 hour process time per source.

About Brass Stamp Settings for the ComMarker ComMarker B6 30W

The ComMarker ComMarker B6 30W cuts Brass Stamp cleanly at 1000 mm/s with 10% power over 10 passes. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Brass Stamp, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Brass Stamp on the ComMarker ComMarker B6 30W?↓

For cutting Brass Stamp on the ComMarker ComMarker B6 30W, start at 1000 mm/s speed and 10% power with 10 passes. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Brass Stamp on the ComMarker ComMarker B6 30W?↓

Air assist is strongly recommended when cutting Brass Stamp. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Brass Stamp on the ComMarker ComMarker B6 30W?↓

The manufacturer recommends 10 passes to cut through Brass Stamp at 1000 mm/s and 10% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my ComMarker ComMarker B6 30W cutting through Brass Stamp?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

More Settings for the ComMarker ComMarker B6 30W

Save Your Own ComMarker ComMarker B6 30W Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your ComMarker ComMarker B6 30W Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF
ComMarker ComMarker B6 30W

Machine Info

BrandComMarker
ModelComMarker B6 30W
Laser Typefiber
Wattage30W
Records1
Browse all ComMarker ComMarker B6 30W materials →

Other ComMarker ComMarker B6 30W Materials