Algolaser DIY KIT MK2 Laser Settings for Colored Canvas
3 verified settings · manufacturer data · diode laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| cut | — | 15 mm/s | 100% | 1 | — | — |
About Colored Canvas Settings for the Algolaser DIY KIT MK2
The Algolaser DIY KIT MK2 cuts Colored Canvas cleanly at 15 mm/s with 100% power. Because the Algolaser DIY KIT MK2 is available in multiple wattage variants (10W, 5W), settings are grouped by wattage above — select your laser's wattage to see the right numbers. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For Colored Canvas, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for Colored Canvas on the Algolaser DIY KIT MK2?↓
For cutting Colored Canvas on the Algolaser DIY KIT MK2, start at 15 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for Colored Canvas on the Algolaser DIY KIT MK2?↓
Air assist is strongly recommended when cutting Colored Canvas. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through Colored Canvas on the Algolaser DIY KIT MK2?↓
The manufacturer recommends 1 pass to cut through Colored Canvas at 15 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my Algolaser DIY KIT MK2 cutting through Colored Canvas?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
Save Your Own Algolaser DIY KIT MK2 Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your Algolaser DIY KIT MK2 Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF