Skip to main content

Raycus 70mm lens Laser Settings for Aluminum

2 verified settings · manufacturer data · fiber laser · Updated July 2026

Quick Answer — Best Cut Setting120W
2,000 mm/s
Speed
40%
Power
1
Passes
Source: OMG Laser
OperationModeSpeedPower (%)PassesAir AssistNotes
cut—2,000 mm/s40%1—Cutting 1.5mm aluminum, non-wobble pass. -45-degree hatch with 13-degree rotations.

About Aluminum Settings for the Raycus 70mm lens

The Raycus 70mm lens cuts Aluminum cleanly at 2000 mm/s with 40% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Aluminum, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Aluminum on the Raycus 70mm lens?↓

For cutting Aluminum on the Raycus 70mm lens, start at 2000 mm/s speed and 40% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Aluminum on the Raycus 70mm lens?↓

Air assist is strongly recommended when cutting Aluminum. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Aluminum on the Raycus 70mm lens?↓

The manufacturer recommends 1 pass to cut through Aluminum at 2000 mm/s and 40% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my Raycus 70mm lens cutting through Aluminum?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

More Settings for the Raycus 70mm lens

Save Your Own Raycus 70mm lens Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your Raycus 70mm lens Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandRaycus
Model70mm lens
Laser Typefiber
Wattage120W
Records2
Browse all Raycus 70mm lens materials →

Other Raycus 70mm lens Materials