Pixels from size and DPI
pixels = inches × DPI
Image Prep Reference
Laser Engraving DPI Calculator
Convert between DPI, physical size, and pixel dimensions before you export artwork for engraving, printing, or machine previews.
Laser engraving starting point
Pick a known machine preset or enter your measured spot size to get a fast DPI recommendation for photo engraving.
Image size converter
Change the physical size or DPI and the export dimensions update instantly in the browser.
mm
mm
dpi
Pixel dimensions
1,181 x 1,772 px
Line interval
0.085 mm
Density
11.8 lines/mm
Recommended Output
- Recommended DPI
- 318 DPI
- Line interval
- 0.080 mm
- Prep tips
- Set your line interval to 0.080 mm in LightBurn or XCS.
- Export using 318 DPI so your photo imports at the intended size.
- Start with high speed and moderate power, then tighten spacing only if a test tile still looks soft.
This tool uses a 1:1 match between spot size and line interval, which is a solid default for photo engraves. Tighten spacing after test burns if you need more edge detail.
Diode preset
Related settings pages
Inches from pixels and DPI
inches = pixels ÷ DPI
Millimeters from pixels and DPI
mm = pixels × 25.4 ÷ DPI
Quick reference
300 DPI
118.11 pixels per centimeter
600 DPI
236.22 pixels per centimeter
254 DPI
10 pixels per millimeter