Skip to main content

OneLaser XRC Laser Settings for Plywood

4 verified settings · manufacturer data · co2 rf laser · Updated July 2026

Quick Answer — Best Cut Setting50W
360 mm/s
Speed
95%
Power
1
Passes
Air assist: YesSource: OneLaser
OperationModeSpeedPower (%)PassesAir AssistNotes
cut—360 mm/s95%1✓10mm plywood cutting with 50W XRC - near max power.
engrave—500 mm/s45%1—Wood engraving with 50W XRC - faster than 38W.

About Plywood Settings for the OneLaser XRC

The OneLaser XRC cuts Plywood cleanly at 360 mm/s with 95% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Plywood, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Plywood on the OneLaser XRC?↓

For cutting Plywood on the OneLaser XRC, start at 360 mm/s speed and 95% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Plywood on the OneLaser XRC?↓

Yes — air assist is recommended when cutting Plywood on the OneLaser XRC. It clears smoke from the cut path, reduces charring, and protects your lens from debris.

How many passes to cut through Plywood on the OneLaser XRC?↓

The manufacturer recommends 1 pass to cut through Plywood at 360 mm/s and 95% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my OneLaser XRC cutting through Plywood?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Save Your Own OneLaser XRC Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your OneLaser XRC Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandOneLaser
ModelXRC
Laser Typeco2 rf
Wattage50W
Records4
Browse all OneLaser XRC materials →

Other OneLaser XRC Materials