xTool S1 Laser Settings for 1/6"(4mm) Brass
3 verified settings · manufacturer data · ir laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| score | Line | 70 mm/s | 60% | 1 | — | — |
| fill | Fill | 140 mm/s | 50% | 1 | — | — |
| engrave | — | 120 mm/s | 80% | 1 | — | — |
About 1/6"(4mm) Brass Settings for the xTool S1
The xTool S1 cuts 1/6"(4mm) Brass cleanly at 70 mm/s with 60% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For 1/6"(4mm) Brass, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for 1/6"(4mm) Brass on the xTool S1?↓
For cutting 1/6"(4mm) Brass on the xTool S1, start at 70 mm/s speed and 60% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for 1/6"(4mm) Brass on the xTool S1?↓
Air assist is strongly recommended when cutting 1/6"(4mm) Brass. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through 1/6"(4mm) Brass on the xTool S1?↓
The manufacturer recommends 1 pass to cut through 1/6"(4mm) Brass at 70 mm/s and 60% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my xTool S1 cutting through 1/6"(4mm) Brass?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the xTool S1
1/6"(4mm) Brass Settings for Other Machines
- xTool F1 Ultra — 1/6"(4mm) brass settings(4)
- xTool D1 Pro 2.0 — 1/6"(4mm) brass settings(3)
- xTool D1 — 1/6"(4mm) brass settings(3)
- xTool F2 Ultra (Single) — 1/6"(4mm) brass settings(3)
- xTool D1 Pro — 1/6"(4mm) brass settings(3)
- xTool F2 Ultra — 1/6"(4mm) brass settings(3)
- xTool F1 — 1/6"(4mm) brass settings(2)
Save Your Own xTool S1 Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your xTool S1 Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF