Skip to main content

xTool P2S Laser Settings for 1/25"(1mm) Purple Anodized Aluminum

3 verified settings · manufacturer data · co2 glass laser · Updated July 2026

Quick Answer — Best Score Setting55W
Line
Mode
25 mm/s
Speed
85%
Power
1
Passes
Source: xTool Material Library
OperationModeSpeedPower (%)PassesAir AssistNotes
scoreLine25 mm/s85%1——
fillFill450 mm/s40%1——
engrave—450 mm/s35%1——

About 1/25"(1mm) Purple Anodized Aluminum Settings for the xTool P2S

The xTool P2S cuts 1/25"(1mm) Purple Anodized Aluminum cleanly at 25 mm/s with 85% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For 1/25"(1mm) Purple Anodized Aluminum, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for 1/25"(1mm) Purple Anodized Aluminum on the xTool P2S?↓

For cutting 1/25"(1mm) Purple Anodized Aluminum on the xTool P2S, start at 25 mm/s speed and 85% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for 1/25"(1mm) Purple Anodized Aluminum on the xTool P2S?↓

Air assist is strongly recommended when cutting 1/25"(1mm) Purple Anodized Aluminum. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through 1/25"(1mm) Purple Anodized Aluminum on the xTool P2S?↓

The manufacturer recommends 1 pass to cut through 1/25"(1mm) Purple Anodized Aluminum at 25 mm/s and 85% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my xTool P2S cutting through 1/25"(1mm) Purple Anodized Aluminum?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Save Your Own xTool P2S Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your xTool P2S Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandxTool
ModelP2S
Laser Typeco2 glass
Wattage55W
Records3
Browse all xTool P2S materials →