xTool P2 Laser Settings for Apple Green Plastic Sprayed 304 Stainless Steel
4 verified settings · manufacturer data · co2 glass laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| score | Line | 25 mm/s | 15% | 1 | — | — |
| fill | Fill | 100 mm/s | 20% | 1 | — | — |
| engrave | — | 100 mm/s | 20% | 1 | — | — |
About Apple Green Plastic Sprayed 304 Stainless Steel Settings for the xTool P2
The xTool P2 cuts Apple Green Plastic Sprayed 304 Stainless Steel cleanly at 25 mm/s with 15% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For Apple Green Plastic Sprayed 304 Stainless Steel, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for Apple Green Plastic Sprayed 304 Stainless Steel on the xTool P2?↓
For cutting Apple Green Plastic Sprayed 304 Stainless Steel on the xTool P2, start at 25 mm/s speed and 15% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for Apple Green Plastic Sprayed 304 Stainless Steel on the xTool P2?↓
Air assist is strongly recommended when cutting Apple Green Plastic Sprayed 304 Stainless Steel. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through Apple Green Plastic Sprayed 304 Stainless Steel on the xTool P2?↓
The manufacturer recommends 1 pass to cut through Apple Green Plastic Sprayed 304 Stainless Steel at 25 mm/s and 15% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my xTool P2 cutting through Apple Green Plastic Sprayed 304 Stainless Steel?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the xTool P2
Apple Green Plastic Sprayed 304 Stainless Steel Settings for Other Machines
- xTool D1 Pro — apple green plastic sprayed 304 stainless steel settings(14)
- xTool D1 Pro 2.0 — apple green plastic sprayed 304 stainless steel settings(14)
- xTool D1 — apple green plastic sprayed 304 stainless steel settings(11)
- xTool S1 — apple green plastic sprayed 304 stainless steel settings(9)
- xTool M1 Ultra — apple green plastic sprayed 304 stainless steel settings(6)
- xTool M1 — apple green plastic sprayed 304 stainless steel settings(6)
- xTool P2S — apple green plastic sprayed 304 stainless steel settings(4)
- xTool F1 Ultra — apple green plastic sprayed 304 stainless steel settings(4)
Save Your Own xTool P2 Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your xTool P2 Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF