xTool P2 Laser Settings for 1/85"(0.3mm) Rose Gold Coated Aluminum Alloy
4 verified settings · manufacturer data · co2 glass laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| score | Line | 150 mm/s | 15% | 1 | — | — |
| engrave | — | 250 mm/s | 15% | 1 | — | — |
| fill | Fill | 400 mm/s | 20% | 1 | — | — |
About 1/85"(0.3mm) Rose Gold Coated Aluminum Alloy Settings for the xTool P2
The xTool P2 cuts 1/85"(0.3mm) Rose Gold Coated Aluminum Alloy cleanly at 150 mm/s with 15% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For 1/85"(0.3mm) Rose Gold Coated Aluminum Alloy, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for 1/85"(0.3mm) Rose Gold Coated Aluminum Alloy on the xTool P2?↓
For cutting 1/85"(0.3mm) Rose Gold Coated Aluminum Alloy on the xTool P2, start at 150 mm/s speed and 15% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for 1/85"(0.3mm) Rose Gold Coated Aluminum Alloy on the xTool P2?↓
Air assist is strongly recommended when cutting 1/85"(0.3mm) Rose Gold Coated Aluminum Alloy. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through 1/85"(0.3mm) Rose Gold Coated Aluminum Alloy on the xTool P2?↓
The manufacturer recommends 1 pass to cut through 1/85"(0.3mm) Rose Gold Coated Aluminum Alloy at 150 mm/s and 15% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my xTool P2 cutting through 1/85"(0.3mm) Rose Gold Coated Aluminum Alloy?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the xTool P2
1/85"(0.3mm) Rose Gold Coated Aluminum Alloy Settings for Other Machines
- xTool D1 Pro 2.0 — 1/85"(0.3mm) rose gold coated aluminum alloy settings(15)
- xTool D1 Pro — 1/85"(0.3mm) rose gold coated aluminum alloy settings(15)
- xTool D1 — 1/85"(0.3mm) rose gold coated aluminum alloy settings(12)
- xTool S1 — 1/85"(0.3mm) rose gold coated aluminum alloy settings(12)
- xTool F2 Ultra — 1/85"(0.3mm) rose gold coated aluminum alloy settings(7)
- xTool F1 — 1/85"(0.3mm) rose gold coated aluminum alloy settings(6)
- xTool M1 Ultra — 1/85"(0.3mm) rose gold coated aluminum alloy settings(6)
- xTool M1 — 1/85"(0.3mm) rose gold coated aluminum alloy settings(6)
Save Your Own xTool P2 Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your xTool P2 Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF