Skip to main content

xTool P2 Laser Settings for 1/85"(0.3mm) Purple Coated Aluminum Alloy

3 verified settings · manufacturer data · co2 glass laser · Updated July 2026

Quick Answer — Best Engrave Setting55W
250 mm/s
Speed
20%
Power
1
Passes
Source: xTool Material Library
OperationModeSpeedPower (%)PassesAir AssistNotes
engrave—250 mm/s20%1——
scoreLine150 mm/s25%1——
fillFill450 mm/s30%1——

About 1/85"(0.3mm) Purple Coated Aluminum Alloy Settings for the xTool P2

The xTool P2 cuts 1/85"(0.3mm) Purple Coated Aluminum Alloy cleanly at 250 mm/s with 20% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For 1/85"(0.3mm) Purple Coated Aluminum Alloy, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for 1/85"(0.3mm) Purple Coated Aluminum Alloy on the xTool P2?↓

For cutting 1/85"(0.3mm) Purple Coated Aluminum Alloy on the xTool P2, start at 250 mm/s speed and 20% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for 1/85"(0.3mm) Purple Coated Aluminum Alloy on the xTool P2?↓

Air assist is strongly recommended when cutting 1/85"(0.3mm) Purple Coated Aluminum Alloy. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through 1/85"(0.3mm) Purple Coated Aluminum Alloy on the xTool P2?↓

The manufacturer recommends 1 pass to cut through 1/85"(0.3mm) Purple Coated Aluminum Alloy at 250 mm/s and 20% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my xTool P2 cutting through 1/85"(0.3mm) Purple Coated Aluminum Alloy?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Save Your Own xTool P2 Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your xTool P2 Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandxTool
ModelP2
Laser Typeco2 glass
Wattage55W
Records3
Browse all xTool P2 materials →