Thunder Laser Nova/Bolt Series (80W CO2) Laser Settings for EVA Foam
4 verified settings · manufacturer data · co2 glass laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| cut | — | 60 mm/s | 90% | 1 | ✓ | Air: high; Lens: 2"; Power range: 10-90% |
| engrave | — | 500 mm/s | 10% | 1 | — | Air: low |
About EVA Foam Settings for the Thunder Laser Nova/Bolt Series (80W CO2)
The Thunder Laser Nova/Bolt Series (80W CO2) cuts EVA Foam cleanly at 60 mm/s with 90% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For EVA Foam, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for EVA Foam on the Thunder Laser Nova/Bolt Series (80W CO2)?↓
For cutting EVA Foam on the Thunder Laser Nova/Bolt Series (80W CO2), start at 60 mm/s speed and 90% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for EVA Foam on the Thunder Laser Nova/Bolt Series (80W CO2)?↓
Yes — air assist is recommended when cutting EVA Foam on the Thunder Laser Nova/Bolt Series (80W CO2). It clears smoke from the cut path, reduces charring, and protects your lens from debris.
How many passes to cut through EVA Foam on the Thunder Laser Nova/Bolt Series (80W CO2)?↓
The manufacturer recommends 1 pass to cut through EVA Foam at 60 mm/s and 90% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my Thunder Laser Nova/Bolt Series (80W CO2) cutting through EVA Foam?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the Thunder Laser Nova/Bolt Series (80W CO2)
EVA Foam Settings for Other Machines
- Thunder Laser Nova/Bolt Series (60W CO2) — eva foam settings(4)
- Thunder Laser Nova Series (55W RF) — eva foam settings(4)
- Thunder Laser Nova/Bolt Series (100W CO2) — eva foam settings(4)
- Thunder Laser Nova/Bolt Series (130W CO2) — eva foam settings(4)
- Thunder Laser Nova Series (30W RF) — eva foam settings(2)
- OMTech OMTech CO2 — eva foam settings(2)
- OneLaser XRF — eva foam settings(2)
Save Your Own Thunder Laser Nova/Bolt Series (80W CO2) Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your Thunder Laser Nova/Bolt Series (80W CO2) Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF