Skip to main content

xTool M1 Laser Settings for 1/3"(8mm) Basswood Plywood

7 verified settings · manufacturer data · diode laser · Updated July 2026

Quick Answer — Best Score Setting10W
Line
Mode
60 mm/s
Speed
60%
Power
1
Passes
Source: xTool Material Library
OperationModeSpeedPower (%)PassesAir AssistNotes
scoreLine60 mm/s60%1——
engrave—140 mm/s50%1——
fillFill200 mm/s50%1——

About 1/3"(8mm) Basswood Plywood Settings for the xTool M1

The xTool M1 cuts 1/3"(8mm) Basswood Plywood cleanly at 60 mm/s with 60% power. Because the M1 is available in multiple wattage variants (10W, 5W), settings are grouped by wattage above — select your laser's wattage to see the right numbers. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For 1/3"(8mm) Basswood Plywood, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for 1/3"(8mm) Basswood Plywood on the xTool M1?↓

For cutting 1/3"(8mm) Basswood Plywood on the xTool M1, start at 60 mm/s speed and 60% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for 1/3"(8mm) Basswood Plywood on the xTool M1?↓

Air assist is strongly recommended when cutting 1/3"(8mm) Basswood Plywood. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through 1/3"(8mm) Basswood Plywood on the xTool M1?↓

The manufacturer recommends 1 pass to cut through 1/3"(8mm) Basswood Plywood at 60 mm/s and 60% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my xTool M1 cutting through 1/3"(8mm) Basswood Plywood?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Save Your Own xTool M1 Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your xTool M1 Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandxTool
ModelM1
Laser Typediode
Variants10W, 5W
Records7
Browse all xTool M1 materials →