WeCreat Lumos Ultra UV 5W PU Leather Orange/Black Laser Settings

WeCreat Lumos Ultra UV 5W Laser Settings for PU Leather Orange/Black

4 verified settings · manufacturer data · uv laser · Updated July 2026

Quick Answer — Best Cut Setting5W

Speed (mm/s)

100%

Power

Passes

Source: WeCreat Lumos Ultra Template Library

Operation	Mode	Speed (mm/s)	Power (%)	Passes	Air Assist	Notes
engrave	Bitmap	2	60%	1	—	Imported from WeCreat Lumos Ultra template id 118d73da-0872-4ff5-b9a2-eff35fd0d541. WeCreat source operation: bitmapEngrave. WeCreat power key: 5w. WeCreat material type code: 2. WeCreat lineDesity: 300. WeCreat dotDuration: 1000. WeCreat bitmap dither mode: jarvis. Material slug hint: leather-synthetic.
score	Line	500	100%	1	—	Imported from WeCreat Lumos Ultra template id 118d73da-0872-4ff5-b9a2-eff35fd0d541. WeCreat source operation: engrave. WeCreat power key: 5w. WeCreat material type code: 2. Material slug hint: leather-synthetic.
cut	—	25	100%	1	—	Imported from WeCreat Lumos Ultra template id 118d73da-0872-4ff5-b9a2-eff35fd0d541. WeCreat source operation: cut. WeCreat power key: 5w. WeCreat material type code: 2. WeCreat cutMode: default. Break points: {"breakPointNum":2,"breakPointSize":0.4,"isBreakPoint":false,"isAutoBreakPoint":true}. Material slug hint: leather-synthetic.

About PU Leather Orange/Black Settings for the WeCreat Lumos Ultra UV 5W

The WeCreat Lumos Ultra UV 5W cuts PU Leather Orange/Black cleanly at 25 mm/s with 100% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For PU Leather Orange/Black, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for PU Leather Orange/Black on the WeCreat Lumos Ultra UV 5W?↓

For cutting PU Leather Orange/Black on the WeCreat Lumos Ultra UV 5W, start at 25 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for PU Leather Orange/Black on the WeCreat Lumos Ultra UV 5W?↓

Air assist is strongly recommended when cutting PU Leather Orange/Black. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through PU Leather Orange/Black on the WeCreat Lumos Ultra UV 5W?↓

The manufacturer recommends 1 pass to cut through PU Leather Orange/Black at 25 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my WeCreat Lumos Ultra UV 5W cutting through PU Leather Orange/Black?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.