Skip to main content

WeCreat Lumos Ultra UV 5W Laser Settings for Pink thermos

2 verified settings · manufacturer data · uv laser · Updated July 2026

Quick Answer — Best Score Setting5W
Line
Mode
1,000 mm/s
Speed
100%
Power
1
Passes
OperationModeSpeedPower (%)PassesAir AssistNotes
scoreLine1,000 mm/s100%1—Imported from WeCreat Lumos Ultra template id 262f47a1-4e4a-4cea-ad93-684cc0c866db. WeCreat source operation: engrave. WeCreat power key: 5w. WeCreat material type code: 8. Material slug hint: stainless-steel.
engraveFill1,000 mm/s100%1—Imported from WeCreat Lumos Ultra template id 262f47a1-4e4a-4cea-ad93-684cc0c866db. WeCreat source operation: fillEngrave. WeCreat power key: 5w. WeCreat material type code: 8. WeCreat lineDesity: 300. Material slug hint: stainless-steel.

About Pink thermos Settings for the WeCreat Lumos Ultra UV 5W

The WeCreat Lumos Ultra UV 5W cuts Pink thermos cleanly at 1000 mm/s with 100% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Pink thermos, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Pink thermos on the WeCreat Lumos Ultra UV 5W?↓

For cutting Pink thermos on the WeCreat Lumos Ultra UV 5W, start at 1000 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Pink thermos on the WeCreat Lumos Ultra UV 5W?↓

Air assist is strongly recommended when cutting Pink thermos. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Pink thermos on the WeCreat Lumos Ultra UV 5W?↓

The manufacturer recommends 1 pass to cut through Pink thermos at 1000 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my WeCreat Lumos Ultra UV 5W cutting through Pink thermos?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Pink thermos Settings for Other Machines

Save Your Own WeCreat Lumos Ultra UV 5W Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your WeCreat Lumos Ultra UV 5W Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandWeCreat
ModelLumos Ultra UV 5W
Laser Typeuv
Wattage5W
Records2
Browse all WeCreat Lumos Ultra UV 5W materials →