Ortur LM2 Pro 20W Laser Settings for Copper
1 verified settings · manufacturer data · diode laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| engrave | — | 100 mm/s | 100% | 1 | — | LightBurn Library: Scan |
About Copper Settings for the Ortur LM2 Pro 20W
The Ortur LM2 Pro 20W cuts Copper cleanly at 100.2 mm/s with 100% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For Copper, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for Copper on the Ortur LM2 Pro 20W?↓
For cutting Copper on the Ortur LM2 Pro 20W, start at 100.2 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for Copper on the Ortur LM2 Pro 20W?↓
Air assist is not required for Copper on the Ortur LM2 Pro 20W according to manufacturer data, though it can still help reduce smoke and improve cut quality on organic materials.
How many passes to cut through Copper on the Ortur LM2 Pro 20W?↓
The manufacturer recommends 1 pass to cut through Copper at 100.2 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my Ortur LM2 Pro 20W cutting through Copper?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
Save Your Own Ortur LM2 Pro 20W Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your Ortur LM2 Pro 20W Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF