xTool F1 Brown-to-gold laserable leatherette Laser Settings

xTool F1 Laser Settings for Brown-to-gold laserable leatherette

1 verified settings · manufacturer data · diode laser · Updated January 2026

Quick Answer — Best Fill Setting10W

450

Speed (mm/s)

65%

Power

Passes

Source: xTool Material Library

Operation	Speed (mm/s)	Power (%)	Passes	Air Assist	Notes
fill	450	65%	1	—	—

About Brown-to-gold laserable leatherette Settings for the xTool F1

The xTool F1 cuts Brown-to-gold laserable leatherette cleanly at 450 mm/s with 65% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Brown-to-gold laserable leatherette, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Brown-to-gold laserable leatherette on the xTool F1?↓

For cutting Brown-to-gold laserable leatherette on the xTool F1, start at 450 mm/s speed and 65% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Brown-to-gold laserable leatherette on the xTool F1?↓

Air assist is strongly recommended when cutting Brown-to-gold laserable leatherette. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Brown-to-gold laserable leatherette on the xTool F1?↓

The manufacturer recommends 1 pass to cut through Brown-to-gold laserable leatherette at 450 mm/s and 65% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my xTool F1 cutting through Brown-to-gold laserable leatherette?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.