Skip to main content

xTool F1 Laser Settings for Black PU Leather

7 verified settings · manufacturer data · diode laser · Updated July 2026

Quick Answer — Best Fill Setting10W
Fill
Mode
150 mm/s
Speed
20%
Power
1
Passes
Source: xTool Material Library
OperationModeSpeedPower (%)PassesAir AssistNotes
fillFill150 mm/s20%1——
scoreLine150 mm/s70%1——

About Black PU Leather Settings for the xTool F1

The xTool F1 cuts Black PU Leather cleanly at 150 mm/s with 20% power. Because the F1 is available in multiple wattage variants (10W, 2W), settings are grouped by wattage above — select your laser's wattage to see the right numbers. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Black PU Leather, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Black PU Leather on the xTool F1?↓

For cutting Black PU Leather on the xTool F1, start at 150 mm/s speed and 20% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Black PU Leather on the xTool F1?↓

Air assist is strongly recommended when cutting Black PU Leather. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Black PU Leather on the xTool F1?↓

The manufacturer recommends 1 pass to cut through Black PU Leather at 150 mm/s and 20% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my xTool F1 cutting through Black PU Leather?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Save Your Own xTool F1 Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your xTool F1 Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandxTool
ModelF1
Laser Typediode
Variants10W, 2W
Records7
Browse all xTool F1 materials →