Skip to main content

xTool F1 Ultra Laser Settings for Peak Purple Plastic Sprayed 304 Stainless Steel

6 verified settings · manufacturer data · diode laser · Updated July 2026

Quick Answer — Best Score Setting20W
Line
Mode
400 mm/s
Speed
75%
Power
1
Passes
Source: xTool Material Library
OperationModeSpeedPower (%)PassesAir AssistNotes
scoreLine400 mm/s75%1——
fillFill200 mm/s75%1——

About Peak Purple Plastic Sprayed 304 Stainless Steel Settings for the xTool F1 Ultra

The xTool F1 Ultra cuts Peak Purple Plastic Sprayed 304 Stainless Steel cleanly at 400 mm/s with 75% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Peak Purple Plastic Sprayed 304 Stainless Steel, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Peak Purple Plastic Sprayed 304 Stainless Steel on the xTool F1 Ultra?↓

For cutting Peak Purple Plastic Sprayed 304 Stainless Steel on the xTool F1 Ultra, start at 400 mm/s speed and 75% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Peak Purple Plastic Sprayed 304 Stainless Steel on the xTool F1 Ultra?↓

Air assist is strongly recommended when cutting Peak Purple Plastic Sprayed 304 Stainless Steel. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Peak Purple Plastic Sprayed 304 Stainless Steel on the xTool F1 Ultra?↓

The manufacturer recommends 1 pass to cut through Peak Purple Plastic Sprayed 304 Stainless Steel at 400 mm/s and 75% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my xTool F1 Ultra cutting through Peak Purple Plastic Sprayed 304 Stainless Steel?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Save Your Own xTool F1 Ultra Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your xTool F1 Ultra Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandxTool
ModelF1 Ultra
Laser Typediode
Wattage20W
Records6
Browse all xTool F1 Ultra materials →