xTool F1 Ultra Laser Settings for Laser Engraving Photo Paper (30pcs)
6 verified settings · manufacturer data · diode laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| fill | Fill | 1,800 mm/s | 50% | 1 | — | — |
| score | Line | 1,000 mm/s | 60% | 1 | — | — |
About Laser Engraving Photo Paper (30pcs) Settings for the xTool F1 Ultra
The xTool F1 Ultra cuts Laser Engraving Photo Paper (30pcs) cleanly at 1800 mm/s with 50% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For Laser Engraving Photo Paper (30pcs), the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for Laser Engraving Photo Paper (30pcs) on the xTool F1 Ultra?↓
For cutting Laser Engraving Photo Paper (30pcs) on the xTool F1 Ultra, start at 1800 mm/s speed and 50% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for Laser Engraving Photo Paper (30pcs) on the xTool F1 Ultra?↓
Air assist is strongly recommended when cutting Laser Engraving Photo Paper (30pcs). It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through Laser Engraving Photo Paper (30pcs) on the xTool F1 Ultra?↓
The manufacturer recommends 1 pass to cut through Laser Engraving Photo Paper (30pcs) at 1800 mm/s and 50% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my xTool F1 Ultra cutting through Laser Engraving Photo Paper (30pcs)?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the xTool F1 Ultra
Laser Engraving Photo Paper (30pcs) Settings for Other Machines
- xTool D1 Pro — laser engraving photo paper (30pcs) settings(15)
- xTool S1 — laser engraving photo paper (30pcs) settings(15)
- xTool D1 Pro 2.0 — laser engraving photo paper (30pcs) settings(15)
- xTool F1 — laser engraving photo paper (30pcs) settings(8)
- xTool M1 — laser engraving photo paper (30pcs) settings(6)
- xTool M1 Ultra — laser engraving photo paper (30pcs) settings(6)
- xTool F1 Lite — laser engraving photo paper (30pcs) settings(4)
- xTool P2 — laser engraving photo paper (30pcs) settings(2)
Save Your Own xTool F1 Ultra Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your xTool F1 Ultra Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF