xTool F1 Ultra Laser Settings for 925 Silver
3 verified settings · manufacturer data · ir laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| engrave | — | 400 mm/s | 100% | 1 | — | — |
| score | Line | 300 mm/s | 85% | 1 | — | — |
| fill | Fill | 500 mm/s | 75% | 1 | — | — |
About 925 Silver Settings for the xTool F1 Ultra
The xTool F1 Ultra cuts 925 Silver cleanly at 400 mm/s with 100% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For 925 Silver, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for 925 Silver on the xTool F1 Ultra?↓
For cutting 925 Silver on the xTool F1 Ultra, start at 400 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for 925 Silver on the xTool F1 Ultra?↓
Air assist is strongly recommended when cutting 925 Silver. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through 925 Silver on the xTool F1 Ultra?↓
The manufacturer recommends 1 pass to cut through 925 Silver at 400 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my xTool F1 Ultra cutting through 925 Silver?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the xTool F1 Ultra
925 Silver Settings for Other Machines
Save Your Own xTool F1 Ultra Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your xTool F1 Ultra Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF