xTool D1 Pro Laser Settings for 1/85"(0.3mm) Blue Metal Business Card
15 verified settings · manufacturer data · diode laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| score | Line | 80 mm/s | 20% | 1 | — | — |
| fill | Fill | 180 mm/s | 15% | 1 | — | — |
| engrave | — | 140 mm/s | 20% | 1 | — | — |
About 1/85"(0.3mm) Blue Metal Business Card Settings for the xTool D1 Pro
The xTool D1 Pro cuts 1/85"(0.3mm) Blue Metal Business Card cleanly at 80 mm/s with 20% power. Because the D1 Pro is available in multiple wattage variants (40W, 20W, 10W, 5W, 2W), settings are grouped by wattage above — select your laser's wattage to see the right numbers. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For 1/85"(0.3mm) Blue Metal Business Card, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for 1/85"(0.3mm) Blue Metal Business Card on the xTool D1 Pro?↓
For cutting 1/85"(0.3mm) Blue Metal Business Card on the xTool D1 Pro, start at 80 mm/s speed and 20% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for 1/85"(0.3mm) Blue Metal Business Card on the xTool D1 Pro?↓
Air assist is strongly recommended when cutting 1/85"(0.3mm) Blue Metal Business Card. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through 1/85"(0.3mm) Blue Metal Business Card on the xTool D1 Pro?↓
The manufacturer recommends 1 pass to cut through 1/85"(0.3mm) Blue Metal Business Card at 80 mm/s and 20% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my xTool D1 Pro cutting through 1/85"(0.3mm) Blue Metal Business Card?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the xTool D1 Pro
1/85"(0.3mm) Blue Metal Business Card Settings for Other Machines
- xTool D1 Pro 2.0 — 1/85"(0.3mm) blue metal business card settings(15)
- xTool S1 — 1/85"(0.3mm) blue metal business card settings(13)
- xTool F1 — 1/85"(0.3mm) blue metal business card settings(7)
- xTool F2 Ultra — 1/85"(0.3mm) blue metal business card settings(6)
- xTool M1 Ultra — 1/85"(0.3mm) blue metal business card settings(6)
- xTool M1 — 1/85"(0.3mm) blue metal business card settings(6)
- xTool F1 Ultra — 1/85"(0.3mm) blue metal business card settings(5)
- xTool F1 Lite — 1/85"(0.3mm) blue metal business card settings(4)
Save Your Own xTool D1 Pro Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your xTool D1 Pro Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDF