xTool D1 Pro 2.0 Laser Settings for gold-plated
3 verified settings · manufacturer data · ir laser · Updated July 2026
| Operation | Mode | Speed | Power (%) | Passes | Air Assist | Notes |
|---|---|---|---|---|---|---|
| engrave | — | 5 mm/s | 100% | 1 | — | — |
| fill | Fill | 5 mm/s | 100% | 1 | — | — |
| score | Line | 5 mm/s | 100% | 1 | — | — |
About gold-plated Settings for the xTool D1 Pro 2.0
The xTool D1 Pro 2.0 cuts gold-plated cleanly at 5 mm/s with 100% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.
For gold-plated, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.
Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.
Frequently Asked Questions
What speed and power for gold-plated on the xTool D1 Pro 2.0?↓
For cutting gold-plated on the xTool D1 Pro 2.0, start at 5 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.
Do I need air assist for gold-plated on the xTool D1 Pro 2.0?↓
Air assist is strongly recommended when cutting gold-plated. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.
How many passes to cut through gold-plated on the xTool D1 Pro 2.0?↓
The manufacturer recommends 1 pass to cut through gold-plated at 5 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.
Why isn't my xTool D1 Pro 2.0 cutting through gold-plated?↓
Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.
More Settings for the xTool D1 Pro 2.0
gold-plated Settings for Other Machines
Save Your Own xTool D1 Pro 2.0 Settings
Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.
Save Your xTool D1 Pro 2.0 Settings
Track what works. Get AI-predicted starting points for any material.
Try Laser Lab Free →Download as PDFMachine Info
Other xTool D1 Pro 2.0 Materials
- 1/8"(3mm) Frosted Black Acrylic
- 3mm Pine Plywood
- 3mm Walnut Plywood
- 1/5"(5mm) Black Acrylic
- 1/25"(1mm) Black Acrylic
