Skip to main content

Boss Laser BL2-T83 Laser Settings for Ceramic

3 verified settings · manufacturer data · co2 glass laser · Updated July 2026

Quick Answer — Best Engrave Setting155W
350 mm/s
Speed
27%
Power
1
Passes
Source: Boss Laser
OperationModeSpeedPower (%)PassesAir AssistNotes
engrave—350 mm/s27%1——

About Ceramic Settings for the Boss Laser BL2-T83

The Boss Laser BL2-T83 cuts Ceramic cleanly at 350 mm/s with 27% power. Because the BL2-T83 is available in multiple wattage variants (155W, 105W, 70W), settings are grouped by wattage above — select your laser's wattage to see the right numbers. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Ceramic, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Ceramic on the Boss Laser BL2-T83?↓

For cutting Ceramic on the Boss Laser BL2-T83, start at 350 mm/s speed and 27% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Ceramic on the Boss Laser BL2-T83?↓

Air assist is strongly recommended when cutting Ceramic. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Ceramic on the Boss Laser BL2-T83?↓

The manufacturer recommends 1 pass to cut through Ceramic at 350 mm/s and 27% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my Boss Laser BL2-T83 cutting through Ceramic?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Save Your Own Boss Laser BL2-T83 Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your Boss Laser BL2-T83 Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF

Machine Info

BrandBoss Laser
ModelBL2-T83
Laser Typeco2 glass
Variants155W, 105W, 70W
Records3
Browse all Boss Laser BL2-T83 materials →