Skip to main content

Algolaser Alpha MK2 Laser Settings for Paulownia Plank

8 verified settings · manufacturer data · diode laser · Updated July 2026

Quick Answer — Best Cut Setting20W
12 mm/s
Speed
100%
Power
1
Passes
Source: Algolaser
OperationModeSpeedPower (%)PassesAir AssistNotes
cut—12 mm/s100%1——
engrave—333 mm/s100%1——

About Paulownia Plank Settings for the Algolaser Alpha MK2

The Algolaser Alpha MK2 cuts Paulownia Plank cleanly at 11.67 mm/s with 100% power. Always test on a scrap piece first — every machine is slightly different, and variables like tube age, lens condition, and material batch can shift results.

For Paulownia Plank, the key variables to dial in are speed and power. If the laser isn't cutting through cleanly, slow down or add a pass before pushing power higher — excessive power causes charring and wider kerfs. Air assist is highly recommended for wood and organic materials to clear smoke and protect the lens.

Once you find settings that work, save them in Laser Lab to build your personal settings library. The AI predictor uses your calibrated results to suggest starting points for new materials automatically — so the more you log, the smarter it gets.

Frequently Asked Questions

What speed and power for Paulownia Plank on the Algolaser Alpha MK2?↓

For cutting Paulownia Plank on the Algolaser Alpha MK2, start at 11.67 mm/s speed and 100% power. These are manufacturer-verified starting points — always test on scrap first.

Do I need air assist for Paulownia Plank on the Algolaser Alpha MK2?↓

Air assist is strongly recommended when cutting Paulownia Plank. It clears smoke from the cut path, reduces charring, and helps protect your laser lens.

How many passes to cut through Paulownia Plank on the Algolaser Alpha MK2?↓

The manufacturer recommends 1 pass to cut through Paulownia Plank at 11.67 mm/s and 100% power. If the cut isn't clean, try reducing speed slightly before adding more passes.

Why isn't my Algolaser Alpha MK2 cutting through Paulownia Plank?↓

Incomplete cuts are usually caused by incorrect power, speed, or focus distance. If edges are charred, try increasing speed or reducing power. If the laser isn't cutting through, reduce speed or increase power — or add an extra pass. Also verify your focal distance is correct for the material thickness and that your lens is clean.

Save Your Own Algolaser Alpha MK2 Settings

Track what works, get AI predictions for new materials, and share with the community. Laser Lab is free to start.

Laser Lab

Save Your Algolaser Alpha MK2 Settings

Track what works. Get AI-predicted starting points for any material.

Try Laser Lab Free →Download as PDF
Algolaser Alpha MK2

Machine Info

BrandUnknown
ModelAlgolaser Alpha MK2
Laser Typediode
Wattage20W
Records8
Browse all Algolaser Alpha MK2 materials →